DESCRIPCIÓN DEL PRODUCTO
| COMPONENT | CONSTRUCTION CHARACTERISTICS |
| PUMP BODY | Cast iron |
| PUMP SUPPORT | Cast iron |
| MOTOR HOUSING | Aluminum |
| IMPELLER | Brass (PPO or AISI304 SS on demand) |
| MOTOR SHAFT | Carbon steel, AISI304 SS on request |
| MECHANICAL SEAL | Ceramic/Graphite |
| BEARINGS | 6202RZ/6202RZ(0.5HP&0.8HP&1HP),6204 RZ/6204RZ(1.5HP&2HP) |
 |
N.DESCRIPTION |
N.DESCRIPTION |
||
|
1 |
Discharge plug |
19 |
Bearing |
|
|
2 |
“O”ring |
20 |
Split ring |
|
|
3 |
Charge plug |
21 |
Screw |
|
|
4 |
“o”ring |
22 |
Terminal cover |
|
|
5 |
Gauge plug |
23 |
Capacitor |
|
|
6 |
Switch plug |
24 |
Terminal box |
|
|
7 |
Pump casing |
25 |
Screw |
|
|
8 |
“O"ring |
26 |
Screw |
|
|
g |
Venturi pipe |
27 |
Terminal board |
|
|
10 |
“O”ring |
28 |
Casing with wound stator |
|
|
11 |
Diffuser |
29 |
Screw |
|
|
12 |
lmpeller |
30 |
Cable presser |
|
|
13 |
“o"ring |
31 |
Fairlead |
|
|
14 |
Mechanical seal |
32 |
Stand |
|
|
15 |
Pump support |
33 |
Driving cap |
|
|
16 |
Bolt |
34 |
Tie-rod |
|
|
17 |
Key |
35 |
Fan |
|
|
18 |
Rotor shaft |
36 |
Fan cover |
|
|
MODEL |
INLET/OUTLET |
POWER |
Q m3Th |
0 |
0.3 |
0.6 |
1.2 |
1.8 |
2.4 |
3.6 |
4.8 |
7.2 |
9.6 |
12 |
|
|
Single phase |
Inch |
kw |
HP |
l/min |
0 |
5 |
10 |
20 |
3o |
40 |
60 |
80 |
120 |
160 |
200 |
|
JET60A |
1"×1 |
0.4 |
0.5 |
H m |
36 |
35 |
26 |
20 |
16 |
7 |
|||||
|
JET80A |
1"×1 |
0.6 |
0.8 |
42 |
41 |
32 |
26 |
20 |
12 |
||||||
|
JET100A |
1"×1 |
0.75 |
1 |
47 |
45 |
38 |
31.5 |
28.5 |
24 |
||||||
H-1U1AL HEAD IN METERS. Q=FLOW RATE
Palabras clave:
Sus detalles de contacto
¡Nota: Por favor deje su información de contacto y nuestros profesionales se comunicarán con usted tan pronto como sea posible!
JET Self-Priming Jet Pump
Resumen:
INSTALLATION AND USE
Suitable for use with clean water and liquids that are notchemically aggressive towards the materials from whichthe pump is made.
The self-priming JET pumps are designed to pump water evenin cases where air is present. As a result of their reliabilityand the fact that they are easy to use, they are recommendedfor use in domestic applications such as the distribution ofwater in combination with small or medium sized pressuresets, and for the irrigation of gardens and allotments, etc. The pump should be installed in an enclosed environment, or atleast sheltered from inclement weather.
MOTOR FEATURE
lnsulation ClassB
Protection IP44
Thermal protector
Continuous service S1
Two-pole induction motor
Single-phase 220V/50Hz, 60Hz on demand
Three-phase 380V/50Hz, 60Hz on demand
OPERATING CONDITION
Suction lift up to 8m
Liquid temperature up to 60°C
Ambient temperature up to 40°C
Clasificación:
Si está interesado en nuestros productos o tiene alguna pregunta, por favor consúltenos.
Contacto con nosotrosCentro de Noticias
22
2025-04
Unión mecánica WERTO en la exposición de Pazhou, ciudad de Guangzhou
Del 15 al 19 de abril de 2025 en la Exhibición de Pazhou, ciudad de Guangzhou
Ver más22
2025-04
Invitación a la Exposición Erbil Build Expo 2025
¿Cómo estás? Esta es la empresa TAIZHOU WERTO MECHANICAL AND ELECTRICAL
Ver másEnlaces rápidos
Producto
Redes sociales
Empresa principal: TAIZHOU WERTO IMPORT AND EXPORT CO.,LTD
ROOM06,5 PISO, UNIT2,#3TIMES BUILDING.NO.115 AVENIDA WENLING ZHEJIANG CHINA de JIULONG
Fábrica: TAIZHOU WERTO CO. MECÁNICO Y ELÉCTRICO, LTD
Dirección: Edificio No.20, zona industrial de Zeguo, Wenling,Zhejiang,China