DESCRIPCIÓN DEL PRODUCTO
| COMPONENT | CONSTRUCTION CHARACTERISTICS |
| PUMP BODY | Cast iron |
| PUMP SUPPORT | Cast iron |
| MOTOR HOUSING | Aluminum |
| IMPELLER | Brass (PPO or AISI304 SS on demand) |
| MOTOR SHAFT | Carbon steel, AISI304 SS on request |
| MECHANICAL SEAL | Ceramic/Graphite |
| BEARINGS | 6202 RZ/6202 RZ |
 |
N.DESCRIPTION | N.DESCRIPTION | ||
| 1 | Discharge plug | 19 | Washer | |
| 2 | Charge plug | 20 | Bolt | |
| 3 | “O”ring | 21 | Key | |
| 4 | “O”ring | 22 | Rotor | |
| 5 | Gange plug | 23 | Split ring | |
| 6 | Switch plug | 24 | Bolt | |
| 7 | Pump casing | 25 | Terminal cover | |
| 8 | “O”ring | 26 | Capacitor | |
| 9 | Diffuser | 27 | Terminal board | |
| 10 | Nut | 28 | Casing with wound stator | |
| 11 | Impeller | 29 | Cable presser | |
| 12 | Mechanicalseal | 30 | Screw | |
| 13 | “O” ring | 31 | Fairlead | |
| 14 | Pump casing cover | 32 | Stand pin | |
| 15 | Bolt | 33 | Stand | |
| 16 | Drops guard | 34 | Driving cap | |
| 17 | Pump support | 35 | Bolt | |
| 18 | Bearing | 36/37 | Fan/Fan cover | |
| PUMP MODEL | DNP | DN1 | DN2 | DN3 | DN4 | DIMENSION mm | |||||||||||
| a | a1 | a2 | f | h | h1 | l | n | n1 | w | s | |||||||
| JDW/1A | JD/1A | 2" | 11/4" | 1" | 1" | 49 | 75 | 46 | 123 | 374 | 206 | 97 | 184 | 190 | 149 | 24 | 10 |
OPERATING DATAN=2900RPM
| MODEL | POWER | Q.MAx | H.MAX | SUCT.MAX | |
| KW | HP | L/MIN | M | M | |
| JDW/1A | 0.75 | 1 | 40 | 40 | 25 |
Palabras clave:
Sus detalles de contacto
¡Nota: Por favor deje su información de contacto y nuestros profesionales se comunicarán con usted tan pronto como sea posible!
Bomba de chorro autocebante JDW
Resumen:
INSTALLATION AND USE
Deep well Self-priming water pumps installed above ground with the jet body submerged guarantees function even when the static level of the well water falls as far as 35 meters below the level of the installed pump.So they are extremely reliable economical and simple to use and find many usages in domestic applications and the automatic distribution of water from small and medium-sized surge tanks,watering gardens,etc.In all cases where the suction depth exceeds the norm acapacity for surface pumps.Suitable for pumping clean water and liquid which are not chemically aggressive to the pump components.The pump should be installed in an enclosed environment or at least sheltered from inclement weather.
MOTOR FEATURE
Insulation ClassB
Protection IP44
Thermal protector
Continuous service S1
Two-poleinduction motor
Single-phase 220V/50Hz,60Hz on demand
Three-phase 380V/50Hz,60Hz on demand
OPERATING CONDITION
Liquid temperature up to 60°C
Ambient temperature up to 40°C
Clasificación:
Si está interesado en nuestros productos o tiene alguna pregunta, por favor consúltenos.
Contacto con nosotrosCentro de Noticias
22
2025-04
Unión mecánica WERTO en la exposición de Pazhou, ciudad de Guangzhou
Del 15 al 19 de abril de 2025 en la Exhibición de Pazhou, ciudad de Guangzhou
Ver más22
2025-04
Invitación a la Exposición Erbil Build Expo 2025
¿Cómo estás? Esta es la empresa TAIZHOU WERTO MECHANICAL AND ELECTRICAL
Ver másEnlaces rápidos
Producto
Redes sociales
Empresa principal: TAIZHOU WERTO IMPORT AND EXPORT CO.,LTD
ROOM06,5 PISO, UNIT2,#3TIMES BUILDING.NO.115 AVENIDA WENLING ZHEJIANG CHINA de JIULONG
Fábrica: TAIZHOU WERTO CO. MECÁNICO Y ELÉCTRICO, LTD
Dirección: Edificio No.20, zona industrial de Zeguo, Wenling,Zhejiang,China