DESCRIPCIÓN DEL PRODUCTO
| COMPONENT | CONSTRUCTION CHARACTERISTICS |
| PUMP BODY | Cast iron |
| PUMP SUPPORT | Cast iron |
| MOTOR HOUSING | Aluminum(2HP&3HP&4HP), Cast iron(5.5HP and more) |
| IMPELLER | Brass(2HP&3HP&4HP), Cast iron(5.5HP and more) |
| MOTOR SHAFT | Carbon steel, AISI304 SS on request |
| MECHANICAL SEAL | Ceramic/Graphite |
| BEARINGS | 6305 RZ/6204 RZ(2HP&3HP), 6305 RZ/6205 RZ(4HP) |
 |
N.DESCRIPTION |
N.DESCRIPTION |
||
|
1 |
Bolt |
23 |
Connector |
|
|
2 |
Washer |
24 |
Bolt |
|
|
3 |
suction flange |
25 |
Bearing |
|
|
4 |
Discharge plug |
26 |
Key |
|
|
5 |
o" ring |
27 |
Rotor |
|
|
6 |
Charge plug |
28 |
Split ring |
|
|
7 |
Delivery gasket |
29 |
Screw |
|
|
8 |
Delivery flange |
30 |
Termial cover |
|
|
9 |
Washer |
31 |
Screw |
|
|
10 |
Bolt |
32 |
Terminal board |
|
|
11 |
Nut |
33 |
Terminal box |
|
|
12 |
suction gasket |
34 |
Casing with wound stator |
|
|
13 |
Pump casing |
35 |
Fairlead |
|
|
14 |
Nut |
36 |
Nut |
|
|
15 |
Nut |
37 |
Capacitor |
|
|
16 |
lmpeller |
38 |
screw |
|
|
17 |
Mechanical seal |
39 |
Stand pin |
|
|
18 |
"o" ring |
40 |
Stand |
|
|
19 |
Seal hold disc |
41 |
Driving cap |
|
|
20 |
oilseal |
42 |
Tie-rod |
|
|
21 |
Pump support |
43 |
Fan |
|
|
22 |
Bolt |
44 |
Fan cover |
|
|
MODEL |
INLET/OUTLET |
POWER |
Q m³/h |
6 |
9 |
12 |
15 |
18 |
21 |
24 |
27 |
30 |
|
|
Single phase |
lnch |
KW |
Hp |
l/min |
100 |
150 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
|
TFM32/160C |
2"*1.25" |
1.5 |
2 |
H m |
27 |
24 |
21 |
18 |
15 |
14 |
|||
|
TFM32/160B |
2"*1.25" |
2.2 |
3 |
29 |
27 |
26 |
25 |
20 |
17 |
16 |
|||
|
TFM32/160A |
2"*1.25" |
3 |
4 |
33 |
31 |
30 |
29 |
28 |
20.5 |
19 |
18 |
||
|
TFM32/200BH |
2"*1.25" |
3 |
4 |
45 |
42 |
39 |
34 |
28 |
|||||
|
TFM32/200AH |
2"*1.25" |
4 |
5.5 |
5 |
52 |
49 |
44 |
38 |
|||||
|
TFM32/200C |
2"*1.25" |
4 |
5.5 |
44 |
43 |
41.5 |
40 |
38 |
36 |
34 |
31.5 |
||
| TF32/200B |
2"*1.25" |
5.5 |
7.5 |
52 |
50.5 |
49 |
47 |
45 |
43 |
41 |
38.5 |
36 |
|
| TF32/200A |
2"*1.25" |
7.5 |
10 |
57 |
56.5 |
56 |
55 |
53 |
52 |
50 |
47 |
44 |
|
H=TOTAL HEAD IN METERS. Q=FLOW RATE
Palabras clave:
Sus detalles de contacto
¡Nota: Por favor deje su información de contacto y nuestros profesionales se comunicarán con usted tan pronto como sea posible!
TFM32/160C 0.5/0.75/1HP Irrigation Centrifugal Pump
Resumen:
INSTALLATION AND USE
Suitable for use in civil and agricultural applications. The high efficiency and continuous duty capabilities makes these pumps ideal for use in activities such as flood and spray irrigation, gardening,agriculture, drawing water from lakes, rivers and wells, or for any number of different industrial applications where the characteristics of high flow rates and middle to low head are required.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
MOTOR FEATURE
lnsulation ClassB
Protection IP44
Thermal protector
Continuous service S1
Two-pole induction motor
Single-phase 220V/50Hz, 60Hz on demand
Three-phase 380V/50Hz, 60Hz on demand
OPERATING CONDITION
Suction lift up to 8m
Liquid temperature up to 60°C
Ambient temperature up to 40°C
Clasificación:
Si está interesado en nuestros productos o tiene alguna pregunta, por favor consúltenos.
Contacto con nosotrosCentro de Noticias
22
2025-04
Unión mecánica WERTO en la exposición de Pazhou, ciudad de Guangzhou
Del 15 al 19 de abril de 2025 en la Exhibición de Pazhou, ciudad de Guangzhou
Ver más22
2025-04
Invitación a la Exposición Erbil Build Expo 2025
¿Cómo estás? Esta es la empresa TAIZHOU WERTO MECHANICAL AND ELECTRICAL
Ver másEnlaces rápidos
Producto
Redes sociales
Empresa principal: TAIZHOU WERTO IMPORT AND EXPORT CO.,LTD
ROOM06,5 PISO, UNIT2,#3TIMES BUILDING.NO.115 AVENIDA WENLING ZHEJIANG CHINA de JIULONG
Fábrica: TAIZHOU WERTO CO. MECÁNICO Y ELÉCTRICO, LTD
Dirección: Edificio No.20, zona industrial de Zeguo, Wenling,Zhejiang,China